The saved examples below were
generated with nlpsem 1.0.0.9006; extdata/REGENERATED.txt
records the versions and how the fits compare with the previous ones.
Rendering this guide does not refit its disabled model-fitting chunks.
Refit with the current version for a new analysis, use
getDiagnostics() to check admissibility and uncertainty,
and compare multiple starts for difficult nonlinear or mixture models.
These examples are not evidence of numerical qualification.
The change plots follow the fitted LCSM interval recurrence. For exponential and Jenss-Bayley models this includes the midpoint approximation used in fitting. The rate plots show interval-average rates at the ending observation time, with joint-covariance pointwise intervals. Selecting fewer fitted waves retains all intervening increments and measures change from the first selected wave; it does not fit or integrate a new curve over the enlarged intervals.
# Load ECLS-K (2011) data
data("RMS_dat")
RMS_dat0 <- RMS_dat
# Re-baseline the data so that the estimated initial status is for the
# starting point of the study
baseT <- RMS_dat0$T1
RMS_dat0$T1 <- (RMS_dat0$T1 - baseT)/12
RMS_dat0$T2 <- (RMS_dat0$T2 - baseT)/12
RMS_dat0$T3 <- (RMS_dat0$T3 - baseT)/12
RMS_dat0$T4 <- (RMS_dat0$T4 - baseT)/12
RMS_dat0$T5 <- (RMS_dat0$T5 - baseT)/12
RMS_dat0$T6 <- (RMS_dat0$T6 - baseT)/12
RMS_dat0$T7 <- (RMS_dat0$T7 - baseT)/12
RMS_dat0$T8 <- (RMS_dat0$T8 - baseT)/12
RMS_dat0$T9 <- (RMS_dat0$T9 - baseT)/12
# Standardize time-invariant covariates (TICs)
## ex1 and ex2 are standardized growth TICs in models
RMS_dat0$ex1 <- scale(RMS_dat0$Approach_to_Learning)
RMS_dat0$ex2 <- scale(RMS_dat0$Attention_focus)
xstarts <- mean(baseT)/12getSummary() function is used to
generate a comprehensive summary table for these two models.
Additionally, the visual representations of the interval-average growth
rate and change from the baseline for both models.Read_LCSM_NonP <- getLCSM(
dat = RMS_dat0, t_var = "T", y_var = "R", curveFun = "nonparametric",
intrinsic = FALSE, records = 1:9, growth_TIC = NULL,
paramOut = TRUE
)
Read_LCSM_NonP_TIC <- getLCSM(
dat = RMS_dat0, t_var = "T", y_var = "R", curveFun = "nonparametric",
intrinsic = FALSE, records = 1:9, growth_TIC = c("ex1", "ex2"),
paramOut = TRUE
)getSummary(model_list = list(Read_LCSM_NonP@mxOutput, Read_LCSM_NonP_TIC@mxOutput))
#> Model No_Params -2ll AIC BIC Y_residuals
#> 1 Model1 13 32288.39 32314.39 32369.18 45.1379
#> 2 Model2 22 34575.48 34619.48 34712.20 45.1410
Figure1 <- getFigure(
model = Read_LCSM_NonP@mxOutput, sub_Model = "LCSM", y_var = "R", curveFun = "NonP",
y_model = "LCSM", t_var = "T", records = 1:9, xstarts = xstarts, xlab = "Year",
outcome = "Reading"
)
show(Figure1)
#> figOutput Object
#> --------------------
#> Trajectories: 1
#> Figure 1:
#> `geom_smooth()` using method = 'gam' and formula = 'y ~ s(x, bs = "cs")'#> Figure 2:
Figure2 <- getFigure(
model = Read_LCSM_NonP_TIC@mxOutput, sub_Model = "LCSM", y_var = "R", curveFun = "NonP",
y_model = "LCSM", t_var = "T", records = 1:9, xstarts = xstarts, xlab = "Year",
outcome = "Reading"
)
show(Figure2)
#> figOutput Object
#> --------------------
#> Trajectories: 1
#> Figure 1:
#> `geom_smooth()` using method = 'gam' and formula = 'y ~ s(x, bs = "cs")'#> Figure 2:
Read_LCSM_QUAD <- getLCSM(
dat = RMS_dat0, t_var = "T", y_var = "R", curveFun = "quadratic", intrinsic = FALSE,
records = 1:9, paramOut = TRUE
)
set.seed(20191029)
Read_LCSM_EXP_r <- getLCSM(
dat = RMS_dat0, t_var = "T", y_var = "R", curveFun = "negative exponential",
intrinsic = FALSE, records = 1:9, tries = 10, paramOut = TRUE
)
set.seed(20191029)
Read_LCSM_JB_r <- getLCSM(
dat = RMS_dat0, t_var = "T", y_var = "R", curveFun = "Jenss-Bayley",
intrinsic = FALSE, records = 1:9, tries = 10, paramOut = TRUE
)Figure3 <- getFigure(
model = Read_LCSM_QUAD@mxOutput, sub_Model = "LCSM", y_var = "R", curveFun = "QUAD",
y_model = "LCSM", t_var = "T", records = 1:9, xstarts = xstarts, xlab = "Year",
outcome = "Reading"
)
show(Figure3)
#> figOutput Object
#> --------------------
#> Trajectories: 1
#> Figure 1:
#> `geom_smooth()` using method = 'gam' and formula = 'y ~ s(x, bs = "cs")'#> Figure 2:
Figure4 <- getFigure(
model = Read_LCSM_EXP_r@mxOutput, sub_Model = "LCSM", y_var = "R", curveFun = "EXP",
y_model = "LCSM", t_var = "T", records = 1:9, xstarts = xstarts, xlab = "Year",
outcome = "Reading"
)
show(Figure4)
#> figOutput Object
#> --------------------
#> Trajectories: 1
#> Figure 1:
#> `geom_smooth()` using method = 'gam' and formula = 'y ~ s(x, bs = "cs")'#> Figure 2:
Figure5 <- getFigure(
model = Read_LCSM_JB_r@mxOutput, sub_Model = "LCSM", y_var = "R", curveFun = "JB",
y_model = "LCSM", t_var = "T", records = 1:9, xstarts = xstarts, xlab = "Year",
outcome = "Reading"
)
show(Figure5)
#> figOutput Object
#> --------------------
#> Trajectories: 1
#> Figure 1:
#> `geom_smooth()` using method = 'gam' and formula = 'y ~ s(x, bs = "cs")'#> Figure 2:
getSummary() function is used to generate a
comprehensive summary table for these two models. Additionally, the
visual representations of the interval-average growth rate and change
from the baseline for both models.